Leading Trolley Mounted Chain Pulley Block Manufacturers In India
Most Trusted Manufacturers In India.
With the experience of about 60 years, we have excelled in providing best in quality ISI standardized chain slings which are delivered all over India. we have a unit of 12,000 sq ft with our own R&D department.
Features & Specifications
Features & Specifications Of Trolley Mounted Chain Pulley Block
Frequently Asked Question
Usually a flat-spotted wheel, debris between the wheel and beam flange, or a width adjustment that has shifted. Check the wheels first, since they run on ball bearings to keep friction low. Dragging means something is obstructing that smooth rotation.
Bent side plates protect the wheels from collision at beam ends. This matters most where the trolley travels the same section of beam repeatedly, since that is where impact damage builds up over time.
A bent plate no longer protects the wheel properly and can throw off wheel alignment. Check the plates after any noticeable collision. If one looks bent, correct it before the trolley goes back into regular use.
The trolley and block are combined into one compact unit, which reduces the headroom needed to lift a load to its highest point of suspension. Suitable for areas where beam height is restricted and a separate trolley and hoist setup would not fit.
The width is adjustable to suit different I-beam flange widths, so it can be configured to fit the beam profile at your site.
Yes, rated for Zone 1, Temperature Class T3, Gas Group IIA and IIB. This needs to be specified at the time of ordering since it is a different build.
Evenly distributed across all four wheels by design, keeping friction low and wear consistent. If one wheel wears faster, the load shifts onto the rest and accelerates wear there too.
Check wheels regularly for flat spots or uneven wear, since these units often work in tighter, harder-to-access spaces. Inspect side plates after any collision. Confirm the width adjustment has not loosened. Check bearings turn smoothly.